General Chemistry Laboratory 1: Laboratory And Chemical Safety

Submitted By golbuff1

Words: 325

Pages: 2

Open Document

General Chemistry
Laboratory 1: Laboratory and Chemical Safety

1. List the 16 section titles found on the new SDS:

1. Product and Company Identification

2. Compositions/ Information on Ingredients

3. Hazards Identifications

4. First Aid Measures

5. Fire Fighting Measures

6. Accidental Release Measures

7. Handling and Storage

8. Exposure Controls/ Personal Protection

9. Physical and Chemical Properties

10. Stability and Reactivity

11. Toxicological Information

12. Ecological Information

13. Disposal Considerations

14. Transport Information

15. Regulatory Information

16. Other Information

2. Find the following information from the MSDS found at www.hazard.com/msds/index.php:

a. Name of company/product: HOME OIL COMPANY, INC -- SPECIALLY DENATURED ETHYL ALCOHOL

b. Hazardous ingredients: Ethyl alcohol and Methyl alcohol

c. Flash point: Method: TOC Flash Point:60.0F,15.6C

d. Extinguishing media: CARBON DIOXIDE, "ALCOHOL-TYPE FOAM," OR DRY CHEMICAL

e. Effects of over exposure (both acute and chronic): MAY BE FATAL IF SWALLOWED. HARMFUL IF INHALED OR ABSORBED THROUGH THE SKIN. CAUSES SKIN, EYE AND UPPER RESPIRATORY TRACT IRRITATION. CAN CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION. CHRONIC EFFECTS: DAMAGE TO THE LIVER, DAMAGE TO THE HEART, DAMAGE TO THE KIDNEYS.

f. Protective equipment needed:
Respiratory Protection: AN APPROPRIATE NIOSH-APPROVED RESPIRATOR SHOULD BE WORN WHEN TWA LIMITS ARE EXCEEDED.
Ventilation: LOCAL EXHAUST AS NECESSARY

lab 1 Essay

Paulina Trzonkowska PART-A INTRODUCTION Diffusion is the random movement of molecules from an area of higher concentration of those molecules to an area of lower concentration. Osmosis is a special case of diffusion, the diffusion of water. In the lab setup there is a dialysis bag with different concentrations of sucrose and glucose. The dialysis bag is then placed in distilled water. Glucose and some iodine is leaving the bag. Sucrose is staying inside the dialysis bag because it will not be able…

Words 1127 - Pages 5

lab 1 Essay

Due 09/28/2014 Abstract: In this lab assignment the different microorganisms were observed at different magnifications. Pictures of each different slide were taken using 10x 40x and in some cases 100x magnification. Purpose: The purpose of this procedure is to learn and understand how to observe different microorganisms and cultures at different magnifications. Procedure: 1) Assemble the Microscope as described 2) Open the labpaq and separate all…

Words 1180 - Pages 5

Lab 1 Essay

Measurement and Experimental Error Experiment #1 Tyler Brown E01237083 Partner: Cameron Talbot PHY 223 Lab Instructor: Ms. Shomsky Tuesday, 9:00 AM-10:50 AM Lecture Instructor: Dr. Behringer Abstract In this lab we took measurements using a ruler and Vernier calipers. We used these to obtain the density of our block, keeping the correct number of significant figures throughout. Two ways of measurement gave us different uncertainties, which we had to use to calculate our answer. We also took…

Words 1288 - Pages 6

Lab 1 Essay

Top of Form CHM130 Lab 1 SAFETY, EQUIPMENT , AND THE SCIENTIFIC METHOD 1. A student enters their laboratory setting and is getting ready to set up. What preparations should be made? (16 points) First disinfect any surfaces that will be used with a 10% bleach solution before beginning any lab. If the solution is too weak meaning less than a 10% solution, you may not kill all bacteria on the surface. It is unsafe to use more than a 10% solution so when mixing the solution make sure to add one…

Words 1655 - Pages 7

Nt1210 Lab 1

As a futures project, I was asked to provide all the necessary information about the project in the lab session and the different steps I need to follow in order to install windows. In my case, I decided to install Windows 8 because of its reliability and efficiency. 1 °) Completed works November 15th: we install the windows following the different stages: Step 1 - Place the Windows DVD in your DVD-ROM drive and start your PC. Windows will start to boot and you will get the screen below with a rotational…

Words 1848 - Pages 8

Lab 1 Essay

name and lab number) and attach. ___________ Date of Experiment ___ 10/6/13 _________ Date Report Submitted ____10/7/13___ __________ Title: Observation of Chemical Changes Objectives: To observe some properties of chemical reactions. To associate chemical properties with household products. Have you made any changes to the procedure? No. Please Explain Data Tables and Observation: Fill out the data sheet for the experiment and submit with this form. Remember: Lab notes…

Words 1073 - Pages 5

Lab 1 Essay

your own and without assistance, complete this Lab 1 Answer Form electronically and submit it via the Assignments Folder by the date listed on your Course Schedule (under Syllabus). • To conduct your laboratory exercises, use the Laboratory Manual that is available in the WebTycho classroom (Reserved Reading or provided by your instructor) or at the eScience Labs Student Portal. Laboratory exercises on your CD may not be updated. • Save your Lab 1 Answer Form in the following format: LastName_Lab1…

Words 1642 - Pages 7

Lab Report 1 Essay

rod, with 200mL of cold water. The mixture was then filtered and the volume was measured at 200mL with no change. Date: April 1, 2014 Purpose: The purpose of this experiment was to introduce the chemistry student to basic laboratory procedures, demonstrate a working knowledge of the equipment and all safety features, and to perform simple lab procedures and compose a lab report at the conclusion of the exercise. Observations: The glass tubing was heated over an open flame for 28 seconds before…

Words 391 - Pages 2

Lab 1 Essay

Task 1 1. Introduction 2. Will the testing be done after business hours? 3. The scope covers the type of testing one need to do like load testing. The scope defines what will be done in the testing process. 4. Define what will be tested and when. 5. Define what we test first. 6. Define what passed and what failed. 7. Define what day and time testing will begin and end. Task 2 1. Foot printing, Scanning and Enumeration, System Hacking, Deploy Payload and cover tracks. 2. The first step…

Words 331 - Pages 2

lab 1 Essay

calculation to obtain uncertainty in momentum for red laser with micrometer setting of 0.4 mm = (.0004 m)(sin(.00678º)) = 4.73333 m 4.73333= p = 1.39986 kg m/s px = sin = sin(.00678º) = 1.6565 kg m/s ΔxΔpx = 0.0004 = m2 kg/s Table 1: Momentum Calculations L (m) 3.38 Red Δx (m) spot width (m) half-width (m) θ wavelength (m) p (kg m/s) 0.0004 0.008 0.004 0.0678 4.73333E-07 1.39986E-27 0.0002 0.02 0.01 0.1695 5.91666E-07 1.11989E-27 0.0001 0.03 0.015 0.2543 4…

Words 1828 - Pages 8