Wincherster Model 62 which replace the Model 1890 and Model 1906 when they were dropped from the Winchester product line in 1932. The Model 62 had a external hammer with a tubular magazine, slide action rifle, and only wiegh 5 ½ pound. If you ever needed to replace the Mainspring. They're are six screw holes located posterior to the trigger guard, only one screw is functional in stock removal. Which is a 1/4" slotted screw is threaded at the bottom of the lower tang for a fillister head screw. The slotted screw head located at the bottom of the rear tang, immediately forward of the lower and the rearmost screw hole, retains the main spring attachment to the hammer from below. If this screw is unknowingly turned loose there will be a very loud
